GE Sievers 900 Series - Advanced Analyzer Settings; Figure 19 the Advanced Menu with One Program Language Loaded; Printing the Current Constants Values

GE Analytical Instruments ©2009 115 of 236 DLM 90488-01 Rev. A
Advanced Analyzer Settings
Analyzer settings are considered to be advanced if they will not be regularly changed in the course
of normal Analyzer operations. If Password Protection or DataGuard is enabled, logging in with a
User ID that has a User Level of Quality or Administrator is required in order to change these
settings.
Figure 19: The Advanced Menu with One Program Language Loaded
Printing the Current Constants Values
Calibration constants, reagent flow rates, and other key parameters are stored in RAM. If you have
a printer attached to the Analyzer, you can print these settings for future reference by following
these steps:
1. Select the Maintenance tab.
2. Press the Advanced button.
3. Press the Print Constants button, and then select one of the following to print:
• System Configuration — Prints basic user-configurable settings.
• System Constants — Prints the factory-set constants for each conductivity cell.
• Calibration Constants — Prints constants set by the most recent calibration.
Advanced 4 Mar 2004 08:24
USB I/O
Print Constants
Advanced Setup
Diagnostics
Warn/Error Out
Empty Syringes
Fill Syringes
Main Start Analysis
Cond. AutoZero