GE Sievers 900 Series - Interpreting Serial Output; Table 8 Data Fields Output to the Serial (RS-232) Port

GE Analytical Instruments ©2009 108 of 236 DLM 90488-01 Rev. A
Interpreting Serial Output
When serial output is set to On, for every measurement the Analyzer outputs the data show in
Table 8.
To view the data, you will need to use a communications program on your PC. For additional
information, see the Appendix section called “Using HyperTerminal” on page 228.
For example, a successful measurement would output as follows:
Note that when the Analyzer takes a successful measurement, the Warning/Error value (Field 9) is
null. If a Warning or Error is generated, the output would be as follows:
Table 8: Data Fields Output to the Serial (RS-232) Port
Field Number Value
1Mode
2Date
3Time
4 TOC (ppb)
5 IC (ppb)
6 TC (ppb)
7Acid (µL/min)
8Oxidizer (µL/min)
9 Warning/Error message, if generated