GE DRAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
Chapter 4 - Functional Checks 4-33
15.)Unscrew 2 screws to remove the ground cables .
Figure 4-42 Removing the ground cables
16.)Unscrew 4 screws to disassemble the keyboard base from the pedestal. Refer to figure
below.
17.)Hold the cast base firmly and lift it up as shown in the images below
Figure 4-44 Holding the KEYBOARD BASE firmly and lift it up
Figure 4-43 Unscrewing 4 screws to disassemble keyboard base
ground cables, remove 2 screws
Hold the cast KEYBOARD BASE firmly and lift it
Lift the base and pull the LCD cables, OPIO cable
and Speaker cables through the keyboard base hole
To Next Page
Loading...
