GE RAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
4-34 Section 4-7 - Peripheral Checks
18.)Assemble Extender with pedestal using 4 flat washers, spring washers and hexagon
socket head cap. Refer to figure below.
19.)Hold the keyboard base firmly and place it on the extender as shown in images below.
Figure 4-45 Assembling Extender
Table 4-8 Part list of Extender
GEPN Description Qty
5432893 Pedestal, Extender, Cast 1
2327604 Flat Washer, ISO7089, M8, Steel 140HV, Zinc Plated 4
5412573 M8 Helical spring lock washers with flat end 4
5172296 Hexagon Socket Head Cap Screw, M8-1.25, X25mm 4
Figure 4-46 Holding the KEYBOARD BASE and place in on the extender
Pull all the cables (speaker cable, LCD cables
and OPIO cable through the KEYBOARD
BASE.
To Next Page
Loading...
