GE DRAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
Chapter 3 - Setup Instructions 3-9
5.
Cut the tape to unfold the package and remove the antistatic vinyl cover
6.
Disengage the brakes, grasp the system at the handle, then slowly move unit down the ramp.
Note: Packing crate and material should be stored for future use.
Table 3-5 Unpacking Procedure
Step Task
Rear panel is used for ramp
To Next Page
Loading...
