GEFRAN-SIEI ARTDrive Vector V2 Series - Page 155

Index
MENUMENU
MENUMENU
MENU [Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
ARTDrive V2 series - Instruction Manual Chapter 6 Parameter • 155


 INTERFACE / Digital inputs destination
This read-only menu allows the user to see where the Digital inputs are connected. If
more then one source is connected to the Digital Input, only first one is shown. If no
sources are connected the message “Not used” is displayed.
C18 INTERFACE / DI dest
C18.00 DI 0 Enable dest 4020
It displays the Digital Input 0 (Enable) destination.
C18.01 DI 1 dest 4021
It displays the Digital Input 1 destination.
C18.02 DI 2 dest 4022
It displays the Digital Input 2 destination.
C18.03 DI 3 dest 4023
It displays the Digital Input 3 destination.
C18.04 DI 4 dest 4024
It displays the Digital Input 4 destination.
C18.05 DI 5 dest 4025
It displays the Digital Input 5 destination.
C18.06 DI 6 dest 4026
It displays the Digital Input 6 destination.
C18.07 DI 7 dest 4027
It displays the Digital Input 7 destination.
C18.08 DI 0X dest Full 4045
It displays the Digital Input 0X destination.
C18.09 DI 1X dest Full 4046
It displays the Digital Input 1X destination.