GEFRAN-SIEI ARTDrive Vector V2 Series - Internal Braking Unit; External Braking Resistor

64 • Chapter 4 Wiring Procedure ARTDrive V2 series - Instruction Manual
4.8.1 Internal Braking Unit
An external braking resistor is required (not included).
For parameter setting refer to STARTUP / Drv & Mot config / BUconfig menu
(chapter 7).
The figure below shows the configuration for internal brake unit operation.
Figure 4.8.1.1: Connection with Internal Braking Unit and External Braking Resistor
Braking
resistor
3Ph~
PE1 /
U1/L1
V1/L2
W1/L3
BR1
U2/T1
V2/T2
W2/T3
C
D
PE2/
F1
Braking
Unit
AC Motor
4.8.2 External Braking Resistor
Table 4.8.2.1: Lists and Technical Data of the External Standard Resistors for 1007 to
5550 (230..480Vac) and 2002 to 5075 (575Vac) inverter sizes
Drive
P
NBR
R
BR
E
BR
Resistor
Type [kW] [Ohm] [kJ] Type a b c a1 b1
1007 … 2040
0.6 100 22
MRI/T600 100R
S8SS3 1.5 (3.3) 320 (12.6) 120 (4.7) 100 (3.9) 360 (14.2)
2055 … 2075
0.9 68 33
MRI/T900 68R
S8SS2 2.7 (6.0) 320 (12.6) 160 (6.3) 120 (4.7) 380 (15.0)
3110
1.3 49 48
MRI/T1300 49R
S8ST4 3.7 (8.2) 320 (12.6) 320 (12.6) 120 (4.7) 380 (15.0)
3150
2.1 28 90
BR T2K0-28R
S8T00F 6.2 (13.7) 625 (24.6) 100 (3.9) 250 (9.8) 605 (23.8) 40 (1.6)
4220
4 15.4 180
BR T4K0-15R4
S8T00G 7.0 (15.4) 625 (24.6) 100 (3.9) 250 (9.8) 605 (23.8) 40 (1.6)
4300…4370
4 11.6 180
BR T4K0-11R6
S8T00H 7.0 (15.4) 625 (24.6) 100 (3.9) 250 (9.8) 605 (23.8) 40 (1.6)
5450…5550
8 7.7 360
BR T8K0-7R7
S8T00I 11.5 (25.) 625 (24.6) 160 (6.3) 250 (9.8) 605 (23.8) 60 (2.4)
2002…2005
0.6 140
22
MRI/T600 140R
S8SY7 1.5 (3.3) 320 (12.6) 120 (4.7) 100 (3.9) 360 (14.2)
3007…3010
0.9 100 33
MRI/T900 100R
S8SY8 2.7 (6.0) 320 (12.6) 160 (6.3) 120 (4.7) 380 (15.0)
3015
1.3 74 48
MRI/T1300 74R
S8SY9 3.7 (8.2) 320 (12.6) 205 (8.7) 120 (4.7) 380 (15.0)
3020
2.1 42 90
BR T2K0-42R
S8T00M 6.2 (13.7) 625 (24.6) 100 (3.9) 250 (9.8) 605 (23.8) 40 (1.6)
4025…4030
4 23 180
BR T4K0-23R
S8T00N 7.0 (15.4) 625 (24.6) 100 (3.9) 250 (9.8) 605 (23.8) 40 (1.6)
4040…4050
4 18 180
BR T4K0-18R
S8T00O 7.0 (15.4) 625 (24.6) 100 (3.9) 250 (9.8) 605 (23.8) 40 (1.6)
5060…5075
8 11.6 180
BR T8K0-11R6
S8T00R 11.5 (25.) 625 (24.6) 160 (6.3) 250 (9.8) 605 (23.8) 60 (2.4)
avy0707
Dimensions : mm (inch)
AVy…-5 (575V)
Weight
kg (lbs)
code
AVy…-4 (230V…480V)
Parameters description:
P
NBR
Rated power of the braking resistor
R
BR
Braking resistor value
E
BR
Max surge energy which can be dissipated by the
resistor
P
PBR
Peak power applied to the braking resistor