GEFRAN-SIEI ARTDrive Vector V2 Series - Regulation Section; RV33 Regulation Card

ARTDrive V2 series - Instruction Manual Chapter 4 Wiring Procedure • 45
4.3 Regulation Section
4.3.1 RV33 Regulation Card
Figure 4.3.1.1: RV33-1 Regulation Card Switch & Jumpers
XP
XT
XT1
X1
F1
X2
XEXP1
80 82 83 85
12345678 912131415161819
21 22 23 26 27 28 29 36 37 38 39 41 42 46 78 79
FRONT SIDE BACK SIDE
S29
XEXP
S30
S28
Table 4.3.1.1: LEDs on Regulation Card
Designation Color Function
RST red LED lit during the Hardware Reset
PWR green LED lit when the voltage +5V is present and at correct level
RS485 green LED is lit when RS485 interface is supplied
ai4050g
Table 4.3.1.2: Test Points on Regulation Card RV33
Designation Function
XY4
Phase current signal (U) (see table 4.3.1.4)
XY5 Reference point
ai4070