GEFRAN-SIEI ARTDrive Vector V2 Series - Standard Connection Diagram; ARTDrive Connections

54 • Chapter 4 Wiring Procedure ARTDrive V2 series - Instruction Manual
4.5 Standard Connection Diagram
4.5.1 ARTDrive Connections
Figure 4.5.1.1: Example Relay Logic Using C00.00 - Term strstp src Command and a
Contactor
EMERGENCY-OFF
EMERGENCY-OFF
K0
K0
S11
Off
S12
Stop
S2
ON / Start
ON / OFF
Start / Stop
K2
K2T
K2T
K2
G1
80
82
ok
t =1s
K2
K1M
K1M
Mains contactor
L01
L00
NOTE! C19.00 - DO0 src parameter must be configured as “Drive OK” for this circuit
(Factory configuration).
The connection diagram reported in the figure 4.5.1.1 (Control sequencing) is
valid only when the configuration of Digital input 1 is set as: C00.00 - Term Str
Stp src = DI 1 mon.