GEFRAN-SIEI ARTDrive Vector V2 Series - Adisplay

Index
MENUMENU
MENUMENU
MENU [Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
ARTDrive V2 series - Instruction Manual Chapter 6 Parameter • 103
A DISPLAY
This menu displays a series of variables useful to check the Drive state. The variable
function is clearly explained by the variable name.
Some of them are not applicable to all the different regulation modes. In this case the
display does not show the variable.
The status variables are noted with a letter to show any ties to a specific regulation mode:
V (V/f) - F (Field oriented) - S (Sensorless)
A00.00 Output freq [Hz] R 0.00 0.00/0.00 PV V-F-S Easy 3080
Drive output frequency.
A01.00 Ramp ref [rpm] R 0.00 0.00/0.00 PV V-F-S Easy 3200
Drive ramp reference.
A02.00 Output curr [A] R 0.00 0.00/0.00 PV V-F-S Easy 3070
Current on the drive output terminals.
A03.00 Output volt [V] R 0.00 0.00/0.00 PV V-F-S Easy 3060
Voltage on the drive output terminals.
A04.00 DC link volt [V] R 0.00 0.00/0.00 PV V-F-S Easy 3100
Drive DC link voltage.
A05.00 Torque ref [Nm] R 0.00 0.00/0.00 PV V-F-S Easy 9406
Overall Torque reference.
A06.00 Output pwr [kW] R 0.00 0.00/0.00 PV V-F-S Easy 3090
Drive output power.
A07.00 Actual speed [rpm] R 0.00 0.00/0.00 PV V-F-S Easy 9405
Motor Speed.
A08.00 Speed ref [rpm] R 0.00 0.00/0.00 PV V-F-S Easy 3210
Drive speed reference
A09.00 Enable SM mon N/A R 0 0/1 DV V-F-S Full 162
Drive Enable status.
0 OFF
1 ON


