GEFRAN-SIEI ARTDrive Vector V2 Series - Page 163

Index
MENUMENU
MENUMENU
MENU [Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
ARTDrive V2 series - Instruction Manual Chapter 6 Parameter • 163


 INTERFACE / Bit->Word
The Word Composing Block, “Bits->Word”, is useful to communicate, for example,
between Drive and APC option card or Drive and Field Bus option card.
This block allows the user to compose a word made of Drive ready, Drive ok, Ref is zero,
Speed is zero, by communicating on a single word.
The Bits->Word n Block has 16 inputs, where each of them can be connected to a signal;
the output of the Word compn Block contains the packed input bits.
Two “Bits->Word” blocks are available.
WORD_0BIT_0
BIT_15
BIT_1
BIT_14
W0 compoutWord0 B0src
Word0 B1src
Word0 B14 src
Word0 B15 src
WORD_1
W1 compout
...............
.......
Figure C22: Bits->Wordn Block
C22 INTERFACE / Bit->Word
C22.00 Word0 B0 src N/A RWS Ipa4000 PList 1 PIN V-F-S-B Full 2100
Ipa 4000 - NULL = Default
It allows to connect the Bit 0 signal selected to the Word 0.
ªª
ªª
ª
Pick List 1
C22.01 Word0 B1 src N/A RWS Ipa4000 PList 1 PIN V-F-S-B Full 2101
Ipa 4000 - NULL = Default
It allows to connect the Bit 1 signal selected to the Word 0
ªª
ªª
ª
Pick List 1
C22.02 Word0 B2 src N/A RWS Ipa4000 PList 1 PIN V-F-S-B Full 2102
Ipa 4000 - NULL = Default
It allows to connect the Bit 2 signal selected to the Word 0.
ªª
ªª
ª
Pick List 1