GEFRAN-SIEI ARTDrive Vector V2 Series - Page 169

Index
MENUMENU
MENUMENU
MENU [Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
ARTDrive V2 series - Instruction Manual Chapter 6 Parameter • 169


 INTERFACE / Word->Bit
The Word Decomposing Block, “Word->Bits”, allows to set some signals on a digital
word; each signal composing the word, on the Block input, can be combined with an
output channel. It is useful to communicate, for example, between APC option card and
or Field Bus option card and Drive.
The “Wordn->Bits” block has an input word and 16 Bx Wn decomp output bits.
Two “Word->Bits” blocks are available.
WORD_0 BIT_0
......
BIT_14
BIT_1
BIT_15
W0decompsrcB0 W0decomp -> Bits
B15 W0decomp -> Bits
B14W0decomp -> Bits
................
B1 W0decomp -> Bits
WORD_1
W1decompsrc
Figure C23: Word->Bit block
C23 INTERFACE / Word->Bit
C23.00 W0 decom src N/A RWS Ipa2121 PList 26 PIN V-F-S-B Full 2120
Ipa 2121 - W0 decomp inp = Default
It allows to connect the word that will be input to decomposing block.
ªª
ªª
ª
Pick List 26
C23.01 W0 decom inp N/A RWS 0X0000 - - DV V-F-S-B Full 2121
It allows to set the “W0 decomp inp” value.
C23.10 W0 decom mon N/A R 0 0 - DP V-F-S-B Full 2122
Monitor of the hexadecimal input value of the Word 0 decomposed.
C23.20 B0 W0 decom N/A R 0 0/1 DV V-F-S-B Full 2123
Bit 0 of Word 0 decomposed displaying.
C23.21 B1 W0 decom N/A R 0 0/1 DV V-F-S-B Full 2124
Bit 1 of Word 0 decomposed displaying.