GEFRAN-SIEI ARTDrive Vector V2 Series - Page 219

Index
MENUMENU
MENUMENU
MENU [Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
ARTDrive V2 series - Instruction Manual Chapter 6 Parameter • 219
F04.14 Spd P3 gain % [%] RWS 10 0/100 PP F-S-B Full 3704
Proportional speed 3 regulator gain at low speed
F04.15 Spd I3 gain % [%] RWS 10 0/100 PP F-S-B Full 3705
Integral speed 3 regulator gain at low speed
F04.20 Adaptive speed 1 [%] RWS 0.00 0/100 PP F-S-B Full 3706
Adaptive speed transition point from 1 to 2 segment
F04.21 Adaptive speed 2 [%] RWS 0.00 0/100 PP F-S-B Full 3707
Adaptive speed transition point from 2 to 3 segment.
F04.22 Adaptive joint 1 [%] RWS 0.00 0/100 PP F-S-B Full 3708
Adaptive joint of the transition from 1 to 2 band.
F04.23 Adaptive joint 2 [%] RWS 0.00 0/100 PP F-S-B Full 3709
Adaptive joint of the transition from 2 to 3 band.
F04.24 Adapt Dig Ref [cnt] RWS 0.00 -32768/32767 PV F-S-B Full 3710
Adaptive digital reference value, selectable through Pick List 19 of F04.00 - Adaptive ref
src.
ªª
ªª
ª
Pick List 19
F04.25 Adapt base value [cnt] RWS 16384 0/16384 PP F-S-B Full 3711
Adaptive basic value corresponding to 100% of the Adaptive reference.
F04.26 Adapt ref mon [cnt] R 0.00 0.00/- PP F-S-B Full 3712
Adaptive reference displaying.
F04.30 InUse SpdP gain% [%] R 10 0.00/100 PV F-S-B Full 2063
In use value of the Proportional speed gain.
F04.31 InUse SpdI gain% [%] R 10 0.00/100 PV F-S-B Full 2065
In use value of the Integral speed gain.