GEFRAN-SIEI ARTDrive Vector V2 Series - Page 281

Index
MENUMENU
MENUMENU
MENU [Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
ARTDrive V2 series - Instruction Manual Chapter 6 Parameter • 281
It allows to select the origin of Asynchronous Word 4 to be transmitted from drive to
APC100 card.
ªª
ªª
ª
Pick List 30
N03.05 Drv APC-A W5src N/A RWS Ipa4145 PList 30 PIN V-F-S-B Full 4135
Ipa 4145 - Dig DrvAPCA W5 = Default.
It allows to select the origin of Asynchronous Word 5 to be transmitted from drive to
APC100 card.
ªª
ªª
ª
Pick List 30
N03.06 Drv APC-A W6src N/A RWS Ipa4146 PList 30 PIN V-F-S-B Full 4136
Ipa 4146 - Dig DrvAPCA W6 = Default.
It allows to select the origin of Asynchronous Word 6 to be transmitted from drive to
APC100 card.
ªª
ªª
ª
Pick List 30
N03.07 Drv APC-A W7src N/A RWS Ipa4147 PList 30 PIN V-F-S-B Full 4137
Ipa 4147 - Dig DrvAPCA W7 = Default.
It allows to select the origin of Asynchronous Word 7 to be transmitted from drive to
APC100 card.
ªª
ªª
ª
Pick List 30
N03.08 Drv APC-A W8src N/A RWS Ipa4148 PList 30 PIN V-F-S-B Full 4138
Ipa 4148 - Dig DrvAPCA W8 = Default.
It allows to select the origin of Asynchronous Word 8 to be transmitted from drive to
APC100 card.
ªª
ªª
ª
Pick List 30
N03.09 Drv APC-A W9src N/A RWS Ipa4149 PList 30 PIN V-F-S-B Full 4139
Ipa 4149 - Dig DrvAPCA W9 = Default.
It allows to select the origin of Asynchronous Word 9 to be transmitted from drive to
APC100 card.
ªª
ªª
ª
Pick List 30