GEFRAN-SIEI ARTDrive Vector V2 Series - Page 322

Chapter 7 Appendix • 322 ARTDrive V2 series - Instruction Manual
Figure 7.3.1: IGBT Voltage Output Signals Optmized
The next figure below shows an example of IGBT output voltage signals not
optimized. In this case increase the value of Dead time slope parameter to
match the figure 7.3.1.
Figure 7.3.2: IGBT Voltage Output Signal Not Optmized 1
The next figure below shows an example of IGBT output voltage signals not
optimized. In this case decrease the value of Dead time slope parameter to
match the figure 7.3.1.