5. SureVend: This menu becomes available when SureVend is enabled via the Product
Configuration menu (see page 30).
1. From the Data Recall menu scroll down and
highlight SureVend then press the ↵ (Edit) key.
The LCD will display the screen as shown
opposite. From this menu screen the engineer
can view and record the number of cup drop
failures that SureVend has logged and also the
number of SureVend assisted vends.
2. Once the engineer has viewed and recorded the data it can be cleared via the
Clear Data menu as described previously.
6. Mug Vends
1. This menu displays the number of vends that the
machine has made without dropping a cup. Once
the engineer has viewed and recorded the data
it can be cleared via the Clear Data menu as
described previously.
7. Print Data
1. This menu displays the data that can be
extracted from the machine when a printer is
connected and the corresponding keypad
number which needs to be pressed to send the
data to the printer. For more information
regarding this function, please see page 44.
4.2 Diagnostic Menu
1. Should a fault occur within the machine, the LCD will display a fault message and
in some cases the machine may become inoperable. The Diagnostic menu displays
error messages relating to faults that may occur, enabling the engineer to easily
locate and repair the problem, bringing the machine quickly back into service.
2. Tables detailing the error messages displayed on the LCD, diagnostic messages
displayed via this menu and fault descriptions are included on pages 84 - 86 of this
manual.
20
Technical Manual
To Next Page
Loading...
Need help?
General