1. From the Monetary menu press the ▼ (down)
key to scroll down and highlight Card Reader and
press the ↵ (Edit) key. Using the
▲ (up) or ▼
(down) keys, select the desired card reader
option (indicated by the filled radio button).
2. Press the ↵ (Edit) key to save the selection and return to the Monetary menu.
Verify that the chosen option is displayed in the status line at the bottom of the
display.
4. Configure Bill Stack Option (MDB Systems Only)
An MDB bill validator is supported and can be mounted in the optional base cabinet
option.
5. Configure Multiple Vend Mode
Note: This option is only applicable when an MDB coin mechanism is fitted and
configured from within the Coin Mechanism menu.
The Multiple Vend Mode option specifies how the machine will dispense change to the
customer once a purchase is made. The engineer can set one of two options:
(i) Single Vend: Change will be returned to the customer automatically as soon
as a valid selection is made.
(ii) Multi Vend: With this option selected the customer can make multiple vends
as long as there is sufficient credit entered. In order to get change, the customer
must press the coin return.
1. From the Monetary menu press the
▼ (down)
key to highlight Multiple Vend Mode and press
the ↵ (Edit) key. Using the
▲ (up) or ▼ (down)
keys, select the desired multiple vend option
(indicated by the filled radio button).
2. Press the ↵ (Edit) key to save the selection and return to the Monetary menu.
Verify that the chosen option is displayed in the status line at the bottom of the
display.
6. Configure Change Without Purchase Value
Note: This option is only applicable when an MDB coin mechanism is fitted and
configured from within the Coin Mechanism menu.
The Change Without Purchase value specifies how and when the machine returns
40
Technical Manual
To Next Page
Loading...
Need help?
General