2. To enter a discount value, e.g. $0.10, press the sequence 0-0-0-1-0 using the
appropriate number keys on the drink selection keypad.
3. The LCD will change and display the screen as
shown. Press the ↵ (Edit) key to return to the
Price menu screen and verify that the new price
displays in the status line along the bottom of the
display.
4. View High/Low Price: This sub menu allows the engineer to view the highest and
lowest values in force, programmed via the Individual Prices sub menu.
Note: If a single price is currently in force, this value will be displayed in both fields.
4.5 Product Configuration Menu
Entry into this menu allows the engineer to configure
the selection timers for the drink selections, disable
drink selections, turn SureVend™ On or Off, set the
cup size, adjust water compensation settings and
grinder calibration values and set brewer waste
counter values.
1. Configuration Version: This displays the manufacturer configuration code for the
machine and is for information purposes only.
2. Selection Timers: Genesis B2C machines are supplied pre-programmed with
carefully tested default recipes for each drink selection. These recipes are for 8oz
drinks and will be suitable for most applications. Each selection can, however, be
adjusted to accommodate different ingredient types or operator/customer preference.
These recipes can be quickly and easily changed from within the Selection Timers
menu.
Important: All selection timer values are displayed in seconds, except for drink
selections made with fresh beans where water values are displayed in millilitres (ml)
and fresh coffee values in grams (g).
1. Highlight Selection Timers then press the ↵
(Edit) key to access the menu. The menu
contains all of the drink selections available from
the machine. Scroll down using the
▼ key to
highlight a selection and press the ↵ (Edit) key to
enter the sub-menu.
27
Technical Manual
To Next Page
Loading...
Need help?
General