$0.05. This is a useful way to quickly check stored settings and also confirm that
a value has been altered correctly.
5. To return to the Main Menu from any screen, simply press the X (Exit) key until
you reach the Main Menu.
3.3 Accessing the Programming Mode
1. Open the door of the machine and insert the door switch key to restore power
to the machine. The machine is now on.
2. Press the Program Entry key (1) on the
service keypad, located inside the door (see page
56 for details). The LCD will display the screen
as shown opposite. Enter the 4 digit engineers
entry pin code using the drink selection keypad.
Note: The factory default code is entered by pressing the sequence 1-1-1-1. You
may be issued with your own personalized code.
3. Press the
↵↵
(Edit) key. Providing the engineer
has entered the code correctly, the LCD will
display the screen as shown opposite. Press the
↵↵
(Edit) key to access the engineers program or
X (Exit) key to return the machine to standby
mode
4. The LCD on the front of the machine will display
the top level programming menu screen - Main
Menu. The first available menu Data Recall is
highlighted indicating that it can be selected.
To move to a different menu press the ▲ (up)
or ▼ (down) keys on the drink selection keypad
until the required menu is highlighted.
5. With the required menu highlighted, press the
↵↵
(Edit) key to select it. Using the Price menu as
an example, the LCD will display the sub menus
as shown opposite.
14
Technical Manual