1. From the Monetary menu press the ▼ (down)
key and highlight Credit For Failed Vend and
press the ↵ (Edit) key. Using the
▲ (up) or ▼
(down) keys, select the desired option (indicated
by the filled radio button).
2. Press the ↵ (Edit) key to save the selection and return to the Monetary menu.
Verify that the chosen option is displayed in the status line at the bottom of the
display when Credit For Failed Vend is highlighted.
10. Configure Card Revalue
Not applicable for Genesis machines.
11. Configure Display Coin Set
The Display Coin Set menu enables the engineer to configure the coin set to suit the
coin/card mechanism or bill validator fitted to the machine. This ensures that the
message displayed in standby mode, correctly indicates to the customer which coins
(or card/key) may be entered.
The available coin sets are:
1. 1c to 20c 2. 1c to 50c 3. 1c to $1 4. 5c to 50c
5. 5c to $1 6. 5c to $2 7. 5c to $1 8. 5c to $2
9. 50c to $1 10. Card 11. Key 12. Money
To configure the coin set:
1. From the Monetary menu press the
▼ (down)
key to highlight Coin Set and press the ↵ (Edit)
key. Using the
▲ (up) or ▼ (down) keys, select
the desired coin set, card or key (indicated by
filled radio button).
2. Press the ↵ (Edit) key to save the new coin set
and return to the Monetary menu. Verify that the
chosen set is displayed in the status line at the
bottom of the display when Coin Set is
highlighted.
5. DTS: Entry into this menu allows the engineer to configure the machine in order
to send audit data relating to sales and events stored in the machines memory to a
43
Technical Manual
To Next Page
Loading...
Need help?
General