6.3 Replacing/Updating Drink Selection Decals
Drink selection and pricing decals are mounted onto a paper backing sheet which is
secured behind a transparent clip-in cover.
To update drink pricing or replace drink description decals, proceed as follows:
1. Carefully unclip the transparent decal cover from the door
using the snap fit clip at the top. Remove the decal sheet
from its holder as shown opposite.
2. Updating pricing: Carefully remove the previous price
decals from the drink selection decals. Update the prices
where necessary using new self adhesive decals (Refer to
Spare Parts, Section 12, for part numbers).
3. Updating drink selections and pricing: When updating selection decals and
prices it will be necessary to use a new backing sheet. These are available as spares
from the manufacturer.
To order quote part no GR11157000 (US English) or GR11199000 (French).
Peel the relevant drink selection decals from their
backing sheet (part no. PR10233000) and apply to the
backing sheet using the printed guides as shown
opposite.
Apply price decals as described above.
4. Place the decal carrier behind the transparent decal cover and refit complete
assembly to the door. Ensure decal cover locating lugs are correctly located before
pushing the snap fit clip into place.
63
Technical Manual
To Next Page
Loading...
Need help?
General