7. Once the required drink has been selected, press the Start button on the keypad.
All lit buttons will be extinguished apart from the drink selection button which
flashes indicating that the drink is being vended.
Unless the customer has placed their own cup
into the dispense area, a cup will automatically
be ejected from the cup drop unit into the
dispense area and the drink selection will be
delivered into the cup. While this operation is in
progress the LCD will display the screen shown
opposite.
8. After the beverage has been dispensed the LCD will display the message Thank
You and the machine will beep once. The message on the display will change to
read Please remove cup. The drink can then be carefully removed from the
dispense area and the machine will return to standby mode.
9. Certain drink selections do not allow the
strength option to be selected or milk added.
For example, if the customer presses the
Cappuccino selection button, all of the other
selection buttons will be extinguished, the Sugar
and START buttons will light up and the LCD
will display the screen opposite. The customer can either press the START button
to vend the drink or first press the sugar button in order to add sugar to their
taste as described above.
10. Other drink choices do not allow the strength
option or milk/sugar to be selected. For
example, if the customer presses the
Chocolate selection button, all of the other
selection buttons will be extinguished, the
START buttons will light up and the LCD will
display the screen opposite. The customer simply presses the START button and
the machine will vend the drink as described above.
62
Technical Manual
To Next Page
Loading...
Need help?
General