4. Press the ↵ (Edit) key to access the State sub
menu. Using the ▼ (down) key, set the state to
On (indicated by the filled radio button). Press
the ↵ (Edit) key and verify that the status line
confirms the State is set to On.
5. Press the
▼ (down) key to highlight Start Time
and press the ↵ (Edit) key. Using the drink
selection keypad, set the time at which the the
Backup event will start. If necessary use the
▲
(up) or ▼ (down) key until AM appears in the
dotted box.
6. Press the ↵ (Edit) key and verify that the correct start time is displayed in the
status line at the bottom of the screen.
7. Press the
▼ (down) key to highlight Days Of
Week and press the ↵ (Edit) key. From this
menu the engineer can set the days on which the
Backup event will take place. To select everyday
(Monday - Sunday), press the START key on the
drink selection keypad. The program
automatically places an X in every box indicating that each day is selected.
Note: To select individual days, scroll through the menu using the
▲ (up) or ▼
(down) keys until the required day is highlighted. Press the ↵ (Edit) key to select
the day, indicated by an X appearing in its adjacent box.
55
Technical Manual
To Next Page
Loading...
Need help?
General