Getinge 9125 User Manual

Password system in the standard 9100-Series machine of Getinge Disinfection AB
Password
Users are defined in screen (2.1.6.6). In screen (2.1.6.6.1) users will be entered with a name, a password
and areas the user has access to (A through L). Passwords may be numerical or alphanumerical. The
password must have a minimum of 3 characters and a maximum of 6 characters. Upper case or lower
case letters do not matter.
Different users may not have the same password. This shall be checked when entering a new password.
The authorization groups are as following:
• Operator (no password requested for start).
• Main operator
• Supervisor
• Service
Operator
Access
code:
Access rights to:
- No authorization to access areas A through L
Main operator
Access
code:
Access rights to:
A Authorization to modify the program, adjustable parameters (A parameters).
D Authorization to acknowledge alarms and start password protected programs.
Supervisor
Access
code:
Access rights to:
A Authorization to modify the program, adjustable parameters (A parameters).
B Authorization to modify time settings
C Authorization to use calibration function.
D Authorization to acknowledge alarms and start password protected programs.
G Authorization to modify the non-process-critical configuration, extended parameters
J Authorization to define new users and change passwords.
K Authorization to the documentation system.
Page 27 of 166
<Doc_TEC><Doc_6001341502><Rel.A><Lang_en>

Getinge 9125 Specifications

General

Brand	Getinge
Model	9125
Category	Laboratory Equipment
Language	English