1. OK
2. HC SHORT
3. EDIT CYCLES
When the cycle number is highlighted, ENTER will allow the number to be edited using the up/down
cursor keys to increase/decrease the number. If two or more numbers are equal when SAVE is pushed, a
message "TWO OR MORE SEQ. NUMBERS EQUAL" will be displayed for three seconds and then return
to save mode.
When cycle name is selected, ENTER will move to the menu below (2.1.6.4.1.1).
Page 62 of 166
<Doc_TEC><Doc_6001341502><Rel.A><Lang_en>