FC4500-UM-251-9370 96
7 ELECTRICAL SECTION
7.5 Regarding the factory Adjustment Value
There is the factory recorded values label to the bottom chassis of electrical box as shown in the picture
below.
Input the those values except the registration mark sensor level adjustment values when only the main
board was replaced.
Renew the values if the values were changed during adjusting.
Factory recorded values
The contents of an example of record are shown below.
Pen pressure adjusted values
2nd Pen pressure adjusted values
(FC4510-60 only)
Pen exchange adjusted values
(FC4500-50/60 only)
Distance accuracy adjusted values
Gain adjusted values
Registration Mark Sensor Position
adjusted values
To Next Page
Loading...
