FC4500-UM-251-9370 58
6 REPLACEMENT PROCEDURES
6.31 X Home Sensor
How to detach the X Home Sensor
(1) Detach the Corner Cover 50L (See section 6.6.).
(2) Detach the Corner Cover 50R (See section 6.8.).
(3) Detach the Panel L (See section 6.11.).
(4) Detach the Interface Cover (See section 6.13.).
(5) Detach the Operation Panel (See section 6.15.).
(6) Detach the Operation Tray (See section 6.16.).
(7) Remove the two M3L6 binding head screws holding the X Home Sensor.
M3L6 binding head screw
X Home Sensor
(8) Open the Bottom Chassis (See section 6.2.).
(9) Disconnect the X Home Sensor Cable from the Main Board, and then detach the X Home Sensor.
Main Board
X Home Sensor Cable
To Next Page
Loading...
