FC4500-UM-251-9370 84
6 REPLACEMENT PROCEDURES
6.47 Measure Tape Pasting Position
Paste the Measuring Tape to the following position when the Measuring tape is removed or replacing.
Preparation
Prepare the Measuring Tape as shown in the picture below when it is replacing to the new Measuring
Tape.
For the FC4500-50/FC4550-50 X direction of measuring tape
(1) Cut the top of measuring tape at 7.5 mm from the 0 position of measuring tape for the X direction of
measuring tape.
(2) Cut the measuring tape at 595 mm position.
Termination 595 mm
For the FC4500-50/FC4550-50 Y direction of measuring tape
(1) Cut the top of measuring tape at 3 mm from the 0 position of measuring tape for the Y direction of
measuring tape.
(2) Cut the measuring tape at 435 mm position.
Termination 435 mm
To Next Page
Loading...
