FC4500-UM-251-9370 80
6 REPLACEMENT PROCEDURES
6.44 Static electricity hold Switch (FC4500-50 only)
How to detach the Static electricity hold Switch
(1) Detach the Corner Cover 50L (See section 6.6.).
(2) Detach the Operation Panel (See section 6.15.).
(3) Disconnect the Static electricity hold Switch Cable from the Control Panel Relay board.
Control Panel Relay board
Static electricity hold Switch
Static electricity hold Switch Cable
(4) Detach the Static electricity hold Switch from the Operation Panel.
How to install the Static electricity hold Switch
(1) Reattach the Static electricity hold Switch in the reverse order in which it was detached.
To Next Page
Loading...
