FC4500-UM-251-9370 90
7 ELECTRICAL SECTION
7 Electrical Adjustment
7.1 List of DIP Switches
Normal mode (factory settings)
This is normal dip-switch setting.
Sets the following dip-Switch settings when the adjustment was nished.
1
ON
OFF
2 3 4 5 6 7 8
Adjustment mode
This is adjustment dip-switch setting.
Sets the following dip-Switch settings to adjust the electrical adjustment.
1
ON
OFF
2 3 4 5 6 7 8
NOVRAM Clear mode
This dip-switch settings clear the all electrical adjustment.
Perform this before performing all electrical adjustment when the main board was replaced.
1
ON
OFF
2 3 4 5 6 7 8
Gain Values input mode
Sets the following dip-switch settings when input the gain values.
1
ON
OFF
2 3 4 5 6 7 8
To Next Page
Loading...
