GRAPHTEC FC 4500 Series - 9 Trouble Shooting; 9.1 The Plotter Doesn’t Operate After Being Turned On

FC4500-UM-251-9370 136
7 ELECTRICAL SECTION
7.16 Select Display Language
When the Japanese Language was displayed perform this procedure to select the English Language.
How to select English display Language
(1) Turn off the power if the power is on.
(2) Turn on the power while pressing the [F3] key.
(3) The menu is displayed by English.
How to select Japanese display Language
(1) Turn off the power if the power is on.
(2) Turn on the power while pressing the [F1] key.
(3) The menu is displayed by Japanese.