FC4500-UM-251-9370 135
7 ELECTRICAL SECTION
7.15 Inputting the Gain Values
Perform this adjustment when the Main Board.
How to input the Gain Value
(1) Turn off the power if the power is on.
(2) Set the DIP switch to Gain Values input mode.
1
ON
OFF
2 3 4 5 6 7 8
(3) Turn on the power.
(4) The following menu is displayed.
FORCE
SPEED
OFFSET
QUALITY
F1 F3
F4
F2
GAIN SET
X= 65 Y= 60
Each keys are corresponding to the following operations.
F2 Key: Cursor moves to the X position adjustment menu.
F4 Key: Cursor moves to the Y position adjustment menu.
Up Position Key: Increasing the adjustment value.
Down Position Key: Decreasing the adjustment value
(5) Input the factory recorded values for GAIN.
(6) Press the [Enter] key after input the gain values.
(7) Turn off the power.
(8) Set the DIP switch to the normal settings.
1
ON
OFF
2 3 4 5 6 7 8
To Next Page
Loading...
