GRAPHTEC FC 4500 Series - 6.38 How to Adjust the Y Slider Roller Tension

FC4500-UM-251-9370 64
6 REPLACEMENT PROCEDURES
6.34 Fan
How to detach the Fan
(1) Open the Bottom Chassis (See section 6.2.).
(2) Disconnect all cables from the main board except the cable of power supply board and the Fan.
(3) Detach the Panel L (See section 6.11.).
(4) Remove the M3L6 binding head screw holding the bottom chassis stopper cable.
M3L6 binding head screw
FC4500-50
FC4500-60/FC4510-60
M3L6 binding head screw
Bottom chassis stopper cable
Bottom chassis