FC4500-UM-251-9370 82
6 REPLACEMENT PROCEDURES
6.46 Writing Panel
How to detach the High Voltage board
(1) Detach the Panel L (See section 6.11.).
(2) Detach the Panel R (See section 6.10.).
(3) Gently peel off the measuring tape from the writing panel.
Measuring tape
(4) Disconnect Writing Panel Cable from the High Voltage Board if the writing panel for the FC4500-50
is detaching.
Writing Panel Cable
(5) The Writing-panel is afxing with the double adhesive tape. Gently peel off the Writing Panel from
the honeycomb plate. Do not damage to top surface of honeycomb plate when the Writing Panel is
peeling off from the honeycomb plate.
Peel off Writing Panel from here.
Writing Panel
Honeycomb plate
To Next Page
Loading...
