GRAPHTEC FC 4500 Series - Page 107

FC4500-UM-251-9370 101
7 ELECTRICAL SECTION
(12) The plotter displays the menu shown below when this adjustment has been completed.
FORCE
SPEED
OFFSET
QUALITY
F1 F3
F4
F2
LEV ADJ DRY TIME
POS ADJ
(13) You don’t need to perform the following steps if you want to continue to the next adjustment.
(14) Turn off the power.
(15) Set the DIP switch to the normal settings.
1
ON
OFF
2 3 4 5 6 7 8