User Manual
Page 22
z Goto channel (Single channel camera selection)
Select“GOTO CHANNEL＂from“MONITORING＂popup menu.
Navigate by using directional button in frontal keypad and directional button on remote controller or by using the
mouse. Off to the side another selectable list with camera labels will appear (Default camera labels are
CAM01~CAM16). Choose the desired camera by selecting the label and single channel view of the camera selection
will appear.
z SPLITTER (2x2, 3x3, 4x4 Split, Previous page, Next Page)
Select“SPLITTER＂from“MONITORING＂popup menu.
Navigate by using directional button in frontal keypad and directional button in remote controller or by using the
mouse.
Select“2 X 2 Split＂4 split quad view,“3 x 3 Split＂for 9 split view and“4 x 4 Split＂for 16 split view.
Full : [ 60(50) FPS @ 720 x 480 (720 x 576) ]
4 split : [ 240(200) FPS @ 360 x 240 (360 x 288) ]
9 split : [ 540(450) FPS @ 240 x 160 (240 x 192) ]
16 split : [ 960(800) FPS @ 180 x 120 (180 x 120) ]
For 4ch/8ch DVR, 3X3 and 4X4 split sub-menus will not be available.
z Previous Page
By selecting “PREVIOUS PAGE＂ option in full screen mode, screen display view will switch screen to lower
number channel. (After channel 1, it rotates to channel 16.)
In split screen mode, clicking Previous Page menu will switch screen to lower number channel groups.
e.g.) [ch1/2/3/4] → [ch13/14/15/16] → [ch9/10/11/12] → [ch5/6/7/8]
In 16 split display mode, this function is not available.
z Next Page
By selecting“NEXT PAGE＂option in full screen mode, screen display view will switch screen to higher number
channel. (After channel 16, it rotates to channel 1).
In split screen mode, clicking Next Page menu will switch screen to higher number channel groups.
e.g.) [ch1/2/3/4] → [ch5/6/7/8] → [ch9/10/11/12] → [ch13/14/15/16]
In 16 split display mode, this function is not available.
z PTZ CONTROL (invokes PTZ Control Toolbar and Virtual Joystick)
Select “PTZ CONTROLL＂ from “MONITORING＂ popup menu.
Note: By pressing button marked“PTZ＂on frontal key pad or remote controllers on single channel view will
invoke PTZ Control Toolbar and Virtual Joystick as well.
PTZ Control Toolbar and Virtual Joystick will appear when PTZ Control menu is selected while in a single channel view.
Frontal Key Pad and Remote Controller operation:
Locate sequence button marked “SEQ＂ and this button will shift keys in PTZ Control Toolbar and press button marked
“↵” (for Frontal key pad) or “OK” button (for Remote controllers)
Directional buttons will control the Virtual Joystick. However diagonal controls are not operable via the directional button.
(Recommend using Mouse for diagonal controls).
To Next Page
Loading...
