User Manual
Page 6
CHAPTER 1. PREFACE
1. Initial Setup
As all of the needed connections are made to the DVR unit, follow the instruction provided below to configure Date and
Time, Camera, Recording and Network configuration
z Before powering up
Make sure the unit is properly connected with Video Output Device, Cameras and protected by connecting to power surge
protector.
Locate the area of where the unit will be placed. The area must be dust free, no direct sun light, no moisture and well
ventilated temperature controlled location.
Power up the unit and do not interrupt the booting process. Make sure the unit is fully turned on before powering down.
z First Initial Boot
z Entering Setup Menu for First Time
By displaying initial boot up message, unit will perform Hard Drive and Network check. Once it completes initial system
checking, it will display maximum allowed split screen of the live view.
Press the [MENU] button on the frontal key pad to enter the setup menu.
Default language for the unit is in English. If you need to change the language settings please check the User's Manual for
details.
z Navigation
Use the supplied mouse for easy operation. User may also use the frontal key pad or Remote Controller key pad to
operate the unit.
Use the ↵ (ENTER) button to commit the highlighted selection.
Use the directional keys STWX to move through a menu or list
Use [MENU] button to enter or exit menu window.
PREFACE
CHAPTER
1
To Next Page
Loading...
