*#1 #52
Owner’s Manual
108
TROUBLESHOOTING
Malfunction of the buttons, the keys, etc.
Turn off the POWER switch once, then turn it on again. If this procedure is not successful, turn off
the POWER switch. While pressing the [RECORD] button, turn the POWER switch on again.
(Note that in this case, all parameters return to their factory-preset status.)
No sound is produced when the keys are pressed.
e MASTER VOLUME is at the minimum setting. >
Adjust the volume with the MASTER VOLUME control. (P. 12 #2)
A plug is inserted to the HEADPHONE jack. >
While a plug is inserted here, the built-in or the Leslie speaker is disabled.
The Foot Switch does not work.
e Foot Switch settings are not correct. >
Reset the Foot Switch correctly in the CONTROL mode. (P. 64 #21)
The rotor of the external Leslie speaker does not stop, if the Leslie o mode
is switched to [BRAKE].
Some Leslie Speaker models do not [BRAKE]. [BRAKE] is possible on 2101/2102, 122XB, 971
and 3300 (current models).
Audio is interrupted when a Combination Preset is selected.
Between the Combination Preset with diff erent Tonewheel Settings, the sound will be cut off while
the Tonewheel Settings are switched.
e sound is once cut between the presets with diff erent key mode (MONO/POLY) on the Pedal
Drawbars, for switching the sound algorithm.
To Next Page
Loading...
Need help?
General
