*#1 #52
Owner’s Manual
66
CUST. TW (CUSTom ToneWheels)
In this mode, you can regulate each virtual Tonewheel set of the
Manual Keyboard, wheel by wheel.
e virtual Tonewheel set consists of 96 virtual Tonewheels of dif-
ferent pitches, and one wheel corresponds with plural notes and
the footage of the Drawbars.
e relation is complicated. For example, the middle C of the 8´
and the C one octave lower of the 4´ use the identical wheel.
In this organ, you can save 5 types of settings per 1 Tonewheel set.
We call this “CUSTOM TONEWHEELS”.
As a sample for customization, the typical 3 (or 4) types of settings
are recorded when delivered from the factory.
To locate this mode:
Touch the [MENU] button and display MENU, select page B by
the [PAGE] button, and then touch [1] CUST.TW button.
1. TONEWHEEL SET
is is for selecting the virtual Tonewheel set. Also, the tem-
porary (= the present setting) automatically switches to the se-
lected virtual Tonewheel set just selected now.
2. CUSTOM NUMBER
is is for selecting the “CUSTOM NUMBER” to use or com-
pile. e “*” will be displayed when the virtual Tonewheel Pa-
rameters are changed from this Custom Number.
NOTE: This parameter is a Preset Parameter. It is recorded into the
Combination Preset.
3. CUSTOM NAME
You can name the CUSTOM virtual TONEWHEELS set us-
ing up to 10 letters.
Move the cursor by the [PARAM] button and choose the letters
by the [VALUE] button.
By touching the [VALUE] button while holding down the
[JUMP] button, it jumps to the fi rst of each letter type (space,
symbol, 0, A, a).
e name set here, as well as the Tonewheel Parameters below,
will be deleted, if you do not do the recording operation as
explained on the next paragraph.
4. WHEEL NUMBER
Select the Number of the Wheel you want to regulate.
To select the Wheel Number, select the [VALUE] button here,
or slightly move the footage of the Drawbar while depressing
the key you want to regulate (see the illustration on the right).
When the Wheel Number is selected, each parameter for the
wheel (#5, #6, #7, #8) is displayed.
INITIAL VALUE OF THE CUSTOM NUMBER
The typical settings are saved to the Number 1 - 3
(or 4), as the initial value.
For example, to the BType1, “Real B-3” simulating
the well-preserved B-3/C-3 and “80’s Clean” with
less noise, rough sound “Noisy”, and “Noisy 60” with
louder leakage noise is stored.
How to select the WHEEL NUMBER
LESLIE
ON
LESLIE
FAST
V-3
C-1
C-3
V-1
IBRATO
HORUS
AND
1
3
4
2
5 6 7 8
To Next Page
Loading...
Need help?
General
