Hammond A-405SP - INITIALIZE CF CARD

97
Using the Sequencer
INITIALIZE THE CF CARD
 e CF Card must be “INITIALIZED” fi rst (= before you use it). Perform the follow-
ing, step by step, to do the initialize operation.
 This operation erases all data in the CF Card.
1
Insert the CF Card into the slot.
2
Touch the [MENU] button to display the menu.
3
Select page E by the [PAGE] button.
4
Touch the [2] CF FORM.
 e FORMAT mode is displayed.
5
Touch the [4] OK button.
 e confi rmation message is displayed.
6
Touch the [4] YES button.
 e initialization starts. It takes only a few seconds.
NOTE: If you do not want to initialize, just touch the [3] NO button.
7
To return to the PLAY mode, touch [PLAY].
SWELL
PRESET
TRANSPOSE
PEDAL GREAT
PLAYJUMPMENU
PAGE/ PARAM.
1234
VALUE
SONG
SWELL
PRESET
TRANSPOSE
PEDAL GREAT
PLAYJUMPMENU
PAGE/ PARAM.
1234
VALUE
SONG
SWELL
PRESET
TRANSPOSE
PEDAL GREAT
PLAYJUMPMENU
PAGE/ PARAM.
1234
VALUE
SONG
SWELL
PRESET
TRANSPOSE
PEDAL GREAT
PLAYJUMPMENU
PAGE/ PARAM.
1234
VALUE
SONG
SWELL
PRESET
TRANSPOSE
PEDAL GREAT
PLAYJUMPMENU
PAGE/ PARAM.
1234
VALUE
SONG