53
Using the Control Panel
SHORT CUT TO THE FUNCTION MODE
Each button on the panel has a “SHORT-CUT” capability, so that you can easily
move to each FUNCTION mode. By holding down the button, you move directly
to the desired mode display. You can save time to search the page for the parameters
you want to change.
Example of operation:
Move to the Percussion function mode.
For example, if you wish to “SHORT CUT” to the Percus-
sion setting, go to the PERCUSSION function mode display,
by holding down either [SECOND HARMONIC], [THIRD
HARMONIC], [DECAY FAST], or [VOLUME SOFT] for a
moment.
Short-cut buttons will be explained in the next Chapter “SET-
TING THE PARAMETERS”.
NOTE: You can change the time for holding down the button for
“SHORT CUT”. (P. 65 #28)
SECOND
HARMONIC
THIRD
HARMONIC
FAST
DECAY
PERCUSS.
SOFT
Press and Hold
To Next Page
Loading...
Need help?
General
