*#1 #52
Owner’s Manual
124
System Realtime Message
Active Sensing
Status
FEH
When Active Sensing is received, the unit begin monitoring the intervals of all
further messages. While monitoring, if the interval between messages exceeds
420 ms, the same processing will be carried out as when All sounds Off, All
Notes Off and Reset All Controllers are received, and message interval monitor-
ing will be halted.
System Exclusive Message
GM System On
F0 7E 7F 09 01 F7
This is a command message that resets the internal settings of unit to the Gen-
eral MIDI initial state. After receiving this message, this unit will automati-
cally be set to the proper condition for correctly playing a General MIDI score.
There must be an interval at least 50 ms between this message and the next
message.
To Next Page
Loading...
Need help?
General
