*#1 #52
Owner’s Manual
70
LESLIE
In this mode, you adjust the settings for the built-in Digital Leslie
Eff ect and the External Leslie Speaker.
e Digital Leslie has many parameters to address. As you set
these parameters to your liking. you will be creating a virtual Leslie
“Cabinet”. at is how the collection of Digital Leslie Parameters
are stored, and exactly how they are named. You select the CABI-
NET NUMBER in each Combination Preset.
To locate this mode:
1. Touch the [MENU] button to display the MENU. Then select
page B by the [PAGE] button and touch [4] LESLIE.
2. Or, hold down either [LESLIE ON] or [LESLIE FAST].
CABINET NUMBERS
1. CABINET NUMBER (P)
Here you select the CABINET NUMBER to use in the Combination Presets.
e setting range is 1 - 8. the “*” will displayed when the Leslie Parameters are ed-
ited from the stored Cabinet Number.
LESLIE PARAMETERS
2. CABINET NAME (L)
is is for assigning the Cabinet Names.
Move the cursor by the [PARAM] button and select letters by the [VALUE] button.
You can use Large and small Alphabets, digits and symbols.
If you touch this button, holding down the [JUMP] button, you can move to the
fi rst letter of each type (= space, symbol, 0, A, a).
You must save your changes, or they will be lost when you exit this edit window. See
“Recording the Cabinet” in the next paragraph.
3. AMPLIFIER (L)
is sets the type of the virtual power amplifi er.
Solid: Ampli er with a at characteristic.
Tube: Simulated Tube Ampli er with a mild characteristic.
4. SPEAKER (L)
is sets the type of the virtual speaker.
RotSmall: A small Leslie such as the Leslie 145.
RotLarge: A large Leslie such as the Leslie 122.
Station: A stationary speaker such as the Hammond PR-40.
CONCEPT OF THE CABINET NUMBERS
Each Cabinet represents one virtual Leslie Speaker
prepared by the Leslie Parameter.
This parameter is the only Preset Parameter in this
mode.
#1
#2
#3
1
3 4
5 6 7 8 9 10 11
12 13 14 15 16 17
18 19
20
21
2
To Next Page
Loading...
Need help?
General
