EasyManua.ls Logo

Hammond A-405SP - Leslie Rotor and Mic Settings

Hammond A-405SP
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
71
Setting the Parameters
5. SLOW SPEED - HORN (L)
12. SLOW SPEED - BASS (L)
Here the Speed of the Rotor is set for Slow mode.
e setting range is 0, 24 - 318 rpm. It does not rotate at 0.
6. FAST SPEED - HORN (L)
13. FAST SPEED - BASS (L)
Here the Speed of the Rotor is set for Fast mode.
e setting range is 0, 24 - 453 rpm. It does not rotate at 0.
7. HORN LEVEL (L)
14. BASS LEVEL (L)
e Volume of each Rotor is set.  e setting range is 0 to -12dB.
8. RISE TIME - HORN (L)
15. RISE TIME - BASS (L)
Here the Time is set for the Rotor to reach the Fast Speed, when you go from Slow or
Break to Fast mode.  e setting range for the Horn Rotor is 0.2 - 5.0s, and the for Bass
Rotor is 0.5 - 12.5s.
9. FALL TIME - HORN (L)
16. FALL TIME - BASS (L)
Here the Time is set for the Rotor to reach the Slow Speed, when you go from Fast to
Slow mode.  e setting range for the Horn Rotor is 0.2 - 5.0s, and the for Bass Rotor
is 0.5 - 12.5s.
10. BRAKE TIME - HORN (L)
17. BRAKE TIME - BASS (L)
Here the Time is set for the Rotor to stop, when you go from Fast mode to Brake.  e
setting range for the Horn Rotor is 0.2 - 5.0s, and the for Bass Rotor is 0.5 - 12.5s.
11. HORN CHARACTER (L)
Here the Tone of the Horn Rotor is set.
“FLAT” has no cut or boost.  e others exhibit various harmonic “peaks”.
18. MIC - ANGLE (L)
is is the parameter to set the locations of the two virtual microphones for the imagi-
nary Leslie Speaker.
e ANGLE decides the distance between the two mikes.
e setting range is 0 - 180°. As you increase the range, the stereophonic image is en-
hanced.
19. MIC - DISTANCE (L)
is is the parameter to set the DISTANCE between the imaginary Leslie Speaker and
the Microphones.
e setting range is 0.3 - 2.7m. As the “distance” grows, the Leslie is less eff ective.
NOTE: When you operate the parameters 2 - 19 (L), the setting range will be lost after the power
is switched o , if you do not do the recording operation of the next paragraph.
Rotor
Speed:
Rise
Time
Fall
Time
Brake
Time
Mode:
SLOW FAST SLOW FAST BRAKE
Distance
Angle

Table of Contents

Related product manuals