*#1 #52
Owner’s Manual
30
Storing registrations in Combination Preset
Ex. Memorize to “6-2”
1
While pressing the [BANK] button, press the Number button
[6].
e LED on the Number button indicates BANK while the
[BANK] button is pressed.
NOTE: The LED goes out if you release the button. This means the
Number is not nal.
2
While pressing the [RECORD] button, press the Number but-
ton [2].
e Number is fi nalized and “Recording Preset” appears on
the Display while the process completes. When the recording
is completed, the LED on the Number button [2] fl ashes for a
few seconds and then switches on. e Display returns to the
previous mode.
e recorded Preset will be automatically selected.
NOTE: The Preset Data is preserved after power o .
1
6789
2345
BANK
RECORD CANCEL
1
6789
2345
BANK
RECORD CANCEL
Press and Hold
Touch
Light
Flash to On
Press and Hold
Touch with...