Hammond A-405SP - Listen to the Demonstration Performance

23
Turn On And Play
LISTEN TO THE DEMONSTRATION PERFORMANCE
1
Touch and hold the [PEDAL TO GREAT] and [GREAT TO
PEDAL] Buttons for 2 seconds.
 e Display will be as shown in step 2.
NOTE: You can locate this mode another way. Touch the [MENU]
Button to display the MENU, touch the [PAGE] Button and
select page F, and touch the [1] DEMO.
2
Press the [PAGE] Button and select a desired song.
 e performance starts when the [4] “X” Button is pressed.
NOTE: After the song is over, the next one starts automatically.
To select a new song while you are playing, touch the [3] “”
Button.  e performance that is playing will stop.
NOTE: You can not operate the controllers while playing the dem-
onstration, except [MASTER VOLUME], [EXT. LESLIE VOL-
UME], [LESLIE ON], [LESLIE FAST] and [VIBRATO & CHORUS].
3
If you press the [PEDAL TO GREAT] and [GREAT TO
PEDAL] Button for 2 seconds, press the [MENU] or [PLAY]
Button, the performance stops.
SWELL PEDAL GREAT
GREAT
TO
PEDAL
PEDAL
TO
GREAT
SUSTAIN
PEDAL
REVERB
EXTRA VOICE
VOLUME
PITCH BEND MODULATION
PEDAL
SWELL
PRESET
TRANSPOSE
PEDAL GREAT
PLAYJUMPMENU
PAGE/ PARAM.
1234
VALUE
SONG
SWELL
PRESET
TRANSPOSE
PEDAL GREAT
PLAYJUMPMENU
PAGE/ PARAM.
1234
VALUE
SONG