55
Using the Control Panel
4
Move the CURSOR to the Parameter you want to change.
DECAY TIME is on the “DECAY” page. Move to that page
using the [PAGE] button.
“FAST” is on the right side of the display. Move the CURSOR
(fl ashing value) to “FAST” using the [PARAM] button.
5
Change the value.
Decrease the value, using the [VALUE] button.
NOTE: Repeat the operation 1 - 5, if you also wish to change the oth-
er parameter.
6
Record into the Combination Presets.
Changing this or any other Preset Parameters are temporary unless saved into a
Combination Preset.
If you want to continue to use the changed value hereafter, you must record the
value into the Combination Preset.
PRESET PARAMETERS
Preset Parameters are the Parameters to be re-
corded into each Combination Preset.
They include the Parameters for setting the
status of the buttons/knobs on the panel,
such as “Decay Fast” and many others.
The general common Parameters (which are
not included in the Combination Presets) are
called “Global Parameters”.
SWELL
PRESET
TRANSPOSE
PEDAL GREAT
PLAYJUMPMENU
PAGE/ PARAM.
1234
VALUE
SONG
SWELL
PRESET
TRANSPOSE
PEDAL GREAT
PLAYJUMPMENU
PAGE/ PARAM.
1234
VALUE
SONG
1
6789
2345
BANK
RECORD CANCEL
To Next Page
Loading...
Need help?
General
