77
Setting the Parameters
7. NOTE - PAN
Sets the pan (Position in the Stereo Field) of this part.
e setting range is L64 (far left) - C (center) - 64R (far right).
8. NOTE - VELOCITY
Sets how the sound engine should responds to touch.
e setting range is OFF, 1 - 4. e velocity of OFF is fi xed at 100. At 1 - 4, the higher
the value increases, the higher velocity is transmitted regardless how the key is played.
9. EFFECTS - REVERB
Sets the depth of the Reverb eff ect.
e setting range is 0 to 127. See REVERB (P. 79) for setting the Reverb eff ect.
10. EFFECTS - CHORUS
Sets the depth of the Chorus eff ect.
e setting range is 0 to 127. See CHORUS (P. 80) for setting the Chorus eff ect.
11. EXPRESSION - MINIMUM
12. EXPRESSION - MAXIMUM
Set how the sound engine responds operation of the Expression Pedal operation.
Set MIN as the minimum volume and MAX as the maximum.
For example, if you want to totally turn off the sound when you fully return the Expres-
sion Pedal, set MIN at 0.
NOTE: All the parameters in these modes are Preset Parameters.
They are recorded into the Combination Preset.
9 10 11 12
To Next Page
Loading...
Need help?
General
