Hammond A-405SP - Recording a Song Step-by-Step

99
Using the Sequencer
6
Set the Metronome ON/OFF, time and tempo with the
[PARAM] and [VALUE] buttons.
7
Press the [MENU] or [ ] button to return to the SONG mode.
8
Press the [ ] button. After counting 2 measures, recording
starts. If the Metronome has been turned OFF, the [ ] light
indicates it is ready for recording by turning from blinking to
fully ON.
9
Play. If you do not want to record your play but only the set-up
data, you may skip this step.
10
After playing, press either of [ ], [ ], [ ].
Recording stops and the song is written to the CF Card with a
provisional name.
SWELL
PRESET
TRANSPOSE
PEDAL GREAT
PLAYJUMPMENU
PAGE/ PARAM.
1234
VALUE
SONG
SWELL
PRESET
TRANSPOSE
PEDAL GREAT
PLAYJUMPMENU
SEQUENCER
PAGE/ PARAM.
1234
VALUE
SONG
SWELL
PRESET
TRANSPOSE
PEDAL GREAT
PLAYJUMPMENU
SEQUENCER
PAGE/ PARAM.
1234
VALUE
SONG
SWELL
PRESET
TRANSPOSE
PEDAL GREAT
PLAYJUMPMENU
SEQUENCER
PAGE/ PARAM.
1234
VALUE
SONG
WHAT WILL SAVED?
A song  le contains both set-up data and play-
ing performance data.
Setup: Global Parameters, Bank Parameters,
Preset Parameters, Leslie Cabinets, Custom
Tone-wheels, Temporary (except expression
source and device ID)
The  le will named “xxxx.BOT” automatically.