90 ACO6800+ Installation and Operation Manual
Copyright © 2009, Harris Corporation
Chapter 8: ACO6800+ISCST Parameters, LEDs, and Alarms
Freeze Type 4, C Determines which mode is activated
when the video freezes
• Field 1
•Field 2
•Frame
Frame Delay 4, D Sets the Frame Sync delay range 0 to 7 frames
Force Freeze 4, E Activates the force freeze mode
•On
• Off
FS Frozen [RO] Indicates if output is frozen by frame
sync
•On
• Off
Force Black 4, F Activates the force black mode
•On
• Off
Video > Trouble Slide
Trouble Slide Source 4, 5 Selects the trouble slide pattern
• Default
• Trouble Slide 1
• Trouble Slide 2
• Trouble Slide 3
Trouble Slide
Background
4, 6 Select the background for default
trouble slide
• Black
• 75% Color Bar
• 100% Color Bar
• H Sweep
• Multiburst
•Ramp
SD Card Status [RO] Indicates whether the SD card is
available
• Absent
• Not Compatible
• Please Select File
• Loading File
• File Loaded
Name of Trouble Slide
(1–3) [RO]
Displays the trouble slide name stored
on SD card
<string>
Video > Video Procamp
Luma Gain 5, 1 Sets the video luminance gain -6 to 6 dB (0)
Luma Offset 5, 2 Sets the video luminance offset
Note Units depend on the operation
frame rate: IRE @ 59.94 or mV @ 50.
• 0 to 15 IRE (0)
• -100 to 100 mV (0)
Cb Gain 5, 3 Sets the video Cb gain -6 to 6 dB (0)
Cr Gain 5, 4 Sets the video Cr gain -6 to 6 dB (0)
Cb Offset 5, 5 Sets the video Cb offset 0 to 100% (50%)
Table 8-2. ACO6800+ISCST SDI Parameters (Continued)
Group Parameter Name
Bank,
Switch
Function Options
To Next Page